void setup() {
// put your setup code here, to run once:
pinMode(21, OUTPUT);
pinMode(19, OUTPUT);
pinMode(18, OUTPUT);
pinMode(23, OUTPUT);
pinMode(22, OUTPUT);
pinMode(5, OUTPUT);
pinMode(4, OUTPUT);
pinMode(2, OUTPUT);
pinMode(15, OUTPUT);;
}
void loop() {
// put your main code here, to run repeatedly:
delay(10);
digitalWrite(21, HIGH);//menghidupkan led
delay(5000); // this speeds up the simulation
digitalWrite(21, LOW);//mematikan led
delay(10);
digitalWrite(19, HIGH);
delay(1000);
digitalWrite(19, LOW);
delay(10);
digitalWrite(18, HIGH);
delay(7000);
digitalWrite(18, LOW);
delay(10);
digitalWrite(23, HIGH);//menghidupkan led
delay(5000); // this speeds up the simulation
digitalWrite(23, LOW);//mematikan led
delay(10);
digitalWrite(22, HIGH);
delay(1000);
digitalWrite(22, LOW);
delay(10);
digitalWrite(5, HIGH);
delay(7000);
digitalWrite(5, LOW);
delay(10);
digitalWrite(4, HIGH);//menghidupkan led
delay(5000); // this speeds up the simulation
digitalWrite(4, LOW);//mematikan led
delay(10);
digitalWrite(2, HIGH);
delay(1000);
digitalWrite(2, LOW);
delay(10);
digitalWrite(15, HIGH);
delay(7000);
digitalWrite(15, LOW);
delay(10);
}
MGMP Matematika MA
Kegiatan PJJ MGMP Matematika MA Kab. Bondowoso
GESS 2019
BERSAMA GURU IGI
MGMP MIPA MTs. ZA
Penelitian MIPA (pengukuran dan SAINS) langsung ke lahan Pertanian Dinas Pertanian Kabupaten Bondowoso di Desa Lojajar.
STEM CAMP SEAQITEP IN MATH
BERSAMA PROf. KUMANO YOSHIZUKE, P.hD SHIZUOKA UNIVERSITY
ANUGRAH GURU INDONESIA IGI
BERSAMA BAPAK ABD KARIM, BAPAK ARIES SAMISANOV JUGA BERSAMA IBU DEPUTI GURBENUR JABAR
Kegiatan Madrasah
BERSAMA KEPALA MA, REKAN GURU, SISWA DAN MAHASISWA MAGANG
September 17, 2022
September 15, 2022
September 14, 2022
KISI-KISI & SOAL MATEMATIKA KELAS 7 & 8
KISI-KISI MATEMATIKA KELAS 7 :
SOAL KELAS 7 :
KISI-KISI MATEMATIKA KELAS 8 :
SOAL KELAS 8 :
SOAL KELAS 7 :
KISI-KISI MATEMATIKA KELAS 8 :
SOAL KELAS 8 :
September 13, 2022
PELATIHAN IoT SEAMOLEC (ESP32 DENGAN SERVO)
PEMBUATAN ALAT GERAK MENGGUNAKAN ESP32 DENGAN SERVO
#include
Servo myservo;
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
myservo.attach(32);
Serial.println("Hello, ESP32!");
}
void loop() {
// put your main code here, to run repeatedly:
myservo.write(0);
delay(1000);
myservo.write(90);
delay(1000);
}
